diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index c9179a5..adadbf4 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -16,6 +16,7 @@
 obj-$(CONFIG_ANDES_PLMT) += andes_plmt.o
 else
 obj-$(CONFIG_RISCV_RDTIME) += rdtime.o
+obj-$(CONFIG_SBI) += sbi.o
 obj-$(CONFIG_SBI_IPI) += sbi_ipi.o
 endif
 obj-y	+= interrupts.o
diff --git a/arch/riscv/lib/sbi.c b/arch/riscv/lib/sbi.c
new file mode 100644
index 0000000..4b6a9e0
--- /dev/null
+++ b/arch/riscv/lib/sbi.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SBI initialilization and all extension implementation.
+ *
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ *
+ * Taken from Linux arch/riscv/kernel/sbi.c
+ */
+
+#include <common.h>
+#include <asm/encoding.h>
+#include <asm/sbi.h>
+
+/* default SBI version is 0.1 */
+unsigned long sbi_spec_version = SBI_SPEC_VERSION_DEFAULT;
+
+struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
+			unsigned long arg1, unsigned long arg2,
+			unsigned long arg3, unsigned long arg4,
+			unsigned long arg5)
+{
+	struct sbiret ret;
+
+	register uintptr_t a0 asm ("a0") = (uintptr_t)(arg0);
+	register uintptr_t a1 asm ("a1") = (uintptr_t)(arg1);
+	register uintptr_t a2 asm ("a2") = (uintptr_t)(arg2);
+	register uintptr_t a3 asm ("a3") = (uintptr_t)(arg3);
+	register uintptr_t a4 asm ("a4") = (uintptr_t)(arg4);
+	register uintptr_t a5 asm ("a5") = (uintptr_t)(arg5);
+	register uintptr_t a6 asm ("a6") = (uintptr_t)(fid);
+	register uintptr_t a7 asm ("a7") = (uintptr_t)(ext);
+	asm volatile ("ecall"
+		      : "+r" (a0), "+r" (a1)
+		      : "r" (a2), "r" (a3), "r" (a4), "r" (a5), "r" (a6), "r" (a7)
+		      : "memory");
+	ret.error = a0;
+	ret.value = a1;
+
+	return ret;
+}
+
+/**
+ * sbi_console_putchar() - Writes given character to the console device.
+ * @ch: The data to be written to the console.
+ *
+ * Return: None
+ */
+void sbi_console_putchar(int ch)
+{
+	sbi_ecall(SBI_EXT_0_1_CONSOLE_PUTCHAR, 0, ch, 0, 0, 0, 0, 0);
+}
+
+/**
+ * sbi_console_getchar() - Reads a byte from console device.
+ *
+ * Returns the value read from console.
+ */
+int sbi_console_getchar(void)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_0_1_CONSOLE_GETCHAR, 0, 0, 0, 0, 0, 0, 0);
+
+	return ret.error;
+}
+
+/**
+ * sbi_clear_ipi() - Clear any pending IPIs for the calling hart.
+ *
+ * Return: None
+ */
+void sbi_clear_ipi(void)
+{
+	sbi_ecall(SBI_EXT_0_1_CLEAR_IPI, 0, 0, 0, 0, 0, 0, 0);
+}
+
+/**
+ * sbi_shutdown() - Remove all the harts from executing supervisor code.
+ *
+ * Return: None
+ */
+void sbi_shutdown(void)
+{
+	sbi_ecall(SBI_EXT_0_1_SHUTDOWN, 0, 0, 0, 0, 0, 0, 0);
+}
+
+/**
+ * sbi_set_timer() - Program the timer for next timer event.
+ * @stime_value: The value after which next timer event should fire.
+ *
+ * Return: None
+ */
+void sbi_set_timer(uint64_t stime_value)
+{
+#if __riscv_xlen == 32
+	sbi_ecall(SBI_EXT_0_1_SET_TIMER, 0, stime_value,
+		  stime_value >> 32, 0, 0, 0, 0);
+#else
+	sbi_ecall(SBI_EXT_0_1_SET_TIMER, 0, stime_value, 0, 0, 0, 0, 0);
+#endif
+}
+
+/**
+ * sbi_send_ipi() - Send an IPI to any hart.
+ * @hart_mask: A cpu mask containing all the target harts.
+ *
+ * Return: None
+ */
+void sbi_send_ipi(const unsigned long *hart_mask)
+{
+	sbi_ecall(SBI_EXT_0_1_SEND_IPI, 0, (unsigned long)hart_mask,
+		  0, 0, 0, 0, 0);
+}
+
+/**
+ * sbi_remote_fence_i() - Execute FENCE.I instruction on given remote harts.
+ * @hart_mask: A cpu mask containing all the target harts.
+ *
+ * Return: None
+ */
+void sbi_remote_fence_i(const unsigned long *hart_mask)
+{
+	sbi_ecall(SBI_EXT_0_1_REMOTE_FENCE_I, 0, (unsigned long)hart_mask,
+		  0, 0, 0, 0, 0);
+}
+
+/**
+ * sbi_remote_sfence_vma() - Execute SFENCE.VMA instructions on given remote
+ *			     harts for the specified virtual address range.
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the virtual address
+ * @size: Total size of the virtual address range.
+ *
+ * Return: None
+ */
+void sbi_remote_sfence_vma(const unsigned long *hart_mask,
+			   unsigned long start,
+			   unsigned long size)
+{
+	sbi_ecall(SBI_EXT_0_1_REMOTE_SFENCE_VMA, 0,
+		  (unsigned long)hart_mask, start, size, 0, 0, 0);
+}
+
+/**
+ * sbi_remote_sfence_vma_asid() - Execute SFENCE.VMA instructions on given
+ * remote harts for a virtual address range belonging to a specific ASID.
+ *
+ * @hart_mask: A cpu mask containing all the target harts.
+ * @start: Start of the virtual address
+ * @size: Total size of the virtual address range.
+ * @asid: The value of address space identifier (ASID).
+ *
+ * Return: None
+ */
+void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
+				unsigned long start,
+				unsigned long size,
+				unsigned long asid)
+{
+	sbi_ecall(SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID, 0,
+		  (unsigned long)hart_mask, start, size, asid, 0, 0);
+}
+
+/**
+ * sbi_probe_extension() - Check if an SBI extension ID is supported or not.
+ * @extid: The extension ID to be probed.
+ *
+ * Return: Extension specific nonzero value f yes, -ENOTSUPP otherwise.
+ */
+int sbi_probe_extension(int extid)
+{
+	struct sbiret ret;
+
+	ret = sbi_ecall(SBI_EXT_BASE, SBI_EXT_BASE_PROBE_EXT, extid,
+			0, 0, 0, 0, 0);
+	if (!ret.error)
+		if (ret.value)
+			return ret.value;
+
+	return -ENOTSUPP;
+}